Ivatt 2MT �Mickey Mouse�
Date: 26 July 2007
Source: Bachmann
Bachmann Europe PLC today issued revised instructions for the removal of the long draw bar between tender and locomotive and replacing it with the replacement provided in the locomotive accessory pack.
Body removal
Remove centre screw under the front pony truck. Remove second screw from read of cab, situated underneath the simulated brake actuator.
Tender draw bar removal
Unscrew first screw just in front of rear of the cab and remove. Half unscrew rear baseplate screw just in front of simulated brake actuator. Lift the base plate 1/2mm which will enable you to withdraw the draw bar from the locomotive. Gently lift the draw bar in an upwards movement to clear the tender location drawbar pin.
BE 2007-43
